|
| |
| FOX SHOX 40MM DUST WIPER KIT |
Fox Shox dust wiper kit for use with 40 series forks.
Price: 18.00
|
|
| FOX SHOX FLOAT AIR SLEEVE KIT |
Fox Shox air sleeve kit for use with the Fox Float.
Price: 8.00
|
|
| VICIOUS CYCLES RIGID FORK |
These top-quality suspension-corrected forks are constructed from True Temper chromoly in New Paltz, New York.
- Note: for rim brakes only. Does not work with disc brakes
- 26" fork has 438mm axle-to-crown and weighs 1100g
- 29" fork has 470mm axle-to-crown 1150g
Price: 275.00
|
|
| INTENSE CYCLES M6 FRO FRAME '09 |
Please call (888) 880-3811 x111 for any sizes or colors not listed.
Intense Cycles products can only be shipped to certain countries.You will be notified at checkout if this item cannot be shipped to yourcountry, and it will be removed from your cart.
The M6 FRO is a bike that is helps to set the benchmark in downhill racing with it's aggressive and well balance geometry, add to this a well refined and tuned suspension system and you have a bike that is built to get to the bottom of the hill in a hurry.
- VPP Linkage design helps to provide a strong and balanced ride
Intense M6 FRO Geometry
| | | SM
| MD
| LG
| Head Tube Angle
| 64.5º
| 64.5º
| 64.5º
| Top Tube Length
| 21.5
| 22.5
| 23.5
| Heat Tube Length
| 4.625
| 5.25
| 5.25
| Seat Tube Length
| 14.75
| 16.75
| 18.25
| Chain Stay Length
| 17.25
| 17.25
| 17.25
| Bottom Bracket Height
| 13.75
| 13.75
| 13.75
| Wheelbase
| 44.5
| 45.5
| 46.5
| Standover Height
| 28.5
| 28.5
| 29.5
| Seatpost Size(mm)
| 31.6
| 31.6
| 31.6
| Headset Size
| 1.5
| 1.5
| 1.5
|
All measurements in inches unless noted
Price: 3150.00
|
|
| INTENSE CYCLES SOCOM FRO FRAME '09 |
Please call (888) 880-3811 x111 for any sizes or colors not listed.
Intense Cycles products can only be shipped to certain countries.You will be notified at checkout if this item cannot be shipped to yourcountry, and it will be removed from your cart.
The SOCOM FRO has the weight of the 6.6 with the strength of anUzzi and the race proven geometry of the M3. The SOCOM FRO is designedto allow you to carve tight turns and then accelerate out of the turnhelping to shave time off of your run.
 | - 6061 heat treated i-Drive frame 7" travel
- Marzocchi Drop Off Triple fork 170mm travel
- Fox DHX 3.0 coil sprung shock, gas charged with rebound
- Hayes HFX-9 brakes
- SRAM X 7 nine speed shift levers
- Shimano LX Dual Pul front, SRAM X 9 nine speed rear derailleurs
- Truvativ Hussefelt cransket 24/36/bashguard
- Truvativ Hussefelt pedals
- 9-speed cassette 11-34
- Truvativ seatpost with forged head with 2 bolt clamp
- SDG new Bel Air saddle
- Truvativ Hussefelt handlebar 6061 heat treated aluminum
- Truvativ Hussefelt stem, forged 6061 heat treated aluminum
- Tioga Blue Dragon tires 2.5" front, 2.3" rear
|
Intense SOCOM FRO Geometry
|
| SM
| MD
| L
| Rider Size*
| 5'2"-5'8"
| 5'6"-6'
| 5'10"-6'4"
| Top Tube
| 22"
| 23"
| 24"
| Head Tube
| 4.625"
| 4.625"
| 5.25"
| Head Angle
| 66.5o | 66.5o | 66.5o | Seat Tube
| 15.75"
| 16.75"
| 18.25"
| | Chainstay | 17.25"
| 17.25"
| 17.25"
| BB Height
| 14.125"
| 14.125"
| 14.125"
| BB Width
| 83mm
| 83mm
| 83mm
| Standover**
| 28"
| 29"
| 30"
| Seat Post
| 31.6mm | 31.6mm | 31.6mm | Headset
| 1.5" | 1.5" | 1.5" | Wheelbase***
| 44.25"
| 45.25"
| 46.25"
| *Rider sizing on this chart is for general sizing only, please call or e-mail our Customer Service Dept. for proper fitment.
**Standover height measured 6" in front of seat post with an 200mm fork @ 562.5 mm ride height and 2.5" tires.
***Wheelbase length is measured using: 200mm fork @ 562.5 mm ride height and 47.6mm offset.
Price: 2760.00
|
|
| INTENSE CYCLES SPIDER 29 FRAME '09 |
Please call (888) 880-3811 x111 for any sizes or colors not listed.
Intense Cycles products can only be shipped to certain countries.You will be notified at checkout if this item cannot be shipped to yourcountry, and it will be removed from your cart.
The Intense Spider 29 is perfect race bike or trail bike for the"Cross Country" rider who appreciates the added functionality of atwenty-nine inch wheel... Work smarter not harder! - 6061 Aluminum CNC machined by " Intense Cycles" construction, Easton Intense proprietary EA-6X tubes.
- Weight: 6lbs
- Travel: 4"
- Reccomended fork length: 80-100mm
- Disk brake compatible
- Replaceable derailleur hanger
- Custom Max type bearings
- One piece top shock link
- Hand made in the USA
| Intense Spider 29 Geometry |
| SM
| MD
| L
| XL
| Rider Size*
| 5'0"-5'8" | 5'6"-6' | 5'10"-6'4" | 6'3-6'6"
| Top Tube
| 22.75" | 23.75"
| 24.75"
| 25.75"
| Head Tube
| 4" | 4.25"
| 4.25"
| 4.6"
| Head Angle
| 73.5 | 73.5
| 73.5
| 73.5
| Seat Tube
| 16"
| 19"
| 21"
| 21"
| Seat Angle
| 73.5
| 73.5
| 73.5
| 73.5
| | Chainstay | 18"
| 18"
| 18"
| 18"
| BB Height
| 12.75"
| 12.75"
| 12.75"
| 12.75"
| BB Width
| 73mm
| 73mm
| 73mm
| 73mm
| Standover**
| 28.5"
| 29.25"
| 31"
| 32"
| Seat Post
| 31.6mm
| 31.6mm
| 31.6mm | 31.6mm | Front Derailleur
| 34.9mm
| 34.9mm
| 34.9mm | 34.9mm | Headset
| 1.125
| 1.125"
| 1.125" | 1.125" | Wheelbase***
| 42.5"
| 43.5"
| 44.5"
| 45.5"
| *Rider sizing on this chart is for general sizing only, please call or e-mail our Customer Service Dept. for proper fitment.
**Standover height measured 6" in front of seat post with an 80mm fork @ 450 mm ride height and 2.0" tires.
***Wheelbase length is measured using: 80mm fork @ 450 mm ride height and 38.1mm offset
Price: 2140.00
|
|
| INTENSE CYCLES SPIDER FRO FRAME '09 |
Please call (888) 880-3811 x111 for any sizes or colors not listed.
Intense Cycles products can only be shipped to certain countries.You will be notified at checkout if this item cannot be shipped to yourcountry, and it will be removed from your cart.
The Spider FRO (For Race Only) is bred for the cross country racerwhere speed and weight are a top priority... when second isn't achoice! The entire Spider FRO frame has been lightened andreconstructed just for the cross country racer. The "goldstandard" in full suspension cross-country frames. VPP "Virtual PivotPoint" technology allow a bob-free ride, but still offers the plushfeel you'd want for an all-day ride. It's constructed of Eastonaluminum tubes with CNC linkages and sealed bearing pivots and offers4" of rear wheel travel. The Spider FRO needs no disclaimer for itsweight, performance or suitability for its intended role as a teamissue cross-country competition mount. It has the versatility to tackleany type of course, from short track to the TransRockies, and shouldbe on every privateer's must-ride list before he or she buys a newracer. ** This bike is not an all mountain machine.This bike is built from the ground up for racing. The lighterconstruction requires a rider who understands the limitations of ridinglighter weight equipment in a harsh environment. This is a rare chanceto own a pro level frame that is now just finally becoming available tothe public. -
Construction: 6061 Aluminum CNC Machined by "Intense Cycles" Easton Intense Proprietary EA 6X tubes -
Weight: 4.9 lbs. -
Manufactured in Temecula, California from materials originating in the USA.
- One piece top shock link
- Custom Max type sealed bearings
- FRO machined bolts and box link
Intense Spider FRO Geometry
|
| SM
| MD
| L
| Rider Size*
| 5'0"-5'8"
| 5'6"-6'
| 5'10"-6'4"
| Top Tube
| 22.25"
| 23.25"
| 24.25"
| Head Tube
| 4.75"
| 5"
| 5.6"
| Head Angle
| 72o | 72o | 72o | Seat Tube
| 14.75"
| 18"
| 19.75"
| Seat Angle
| 73.5o | 73.5o | 73.5o
| | Chainstay | 16.75"
| 16.75"
| 16.75"
| BB Height
| 12.5"
| 12.5"
| 12.5"
| BB Width
| 73mm
| 73mm
| 73mm
| Standover**
| 28"
| 28"
| 28.5"
| Seat Post
| 31.6mm | 31.6mm | 31.6mm | Front Derailleur
| 34.9mm | 34.9mm | 34.9mm | Headset
| 1.125" | 1.125" | 1.125" | Wheelbase***
| 41.25"
| 42.25"
| 43.25"
| *Rider sizing on this chart is for general sizing only, please call or e-mail our Customer Service Dept. for proper fitment.
**Standover height measured 6" in front of seat post with an 80mm fork @ 450 mm ride height and 2.0" tires.
***Wheelbase length is measured using: 80mm fork @ 450 mm ride height and 38.1mm offset.
Price: 2410.00
|
|
| INTENSE TRACER VP FRAME NO ISCG TABS 09 |
Please call (888) 880-3811 x111 for any sizes or colors not listed.
This frame features adjustable travel from 5.5 to 6 inches and the next-generation of VPP suspension design, and the end result could be the "do-it-all" frame you've been waiting for. And it is versatile enough to be built up as anything from a lightweight XC-style trailbike to an aggressive-use machine with a big fork and brakes.
| - New lower bearing system includes grease fittings, easing maintenance and prolonging life
- Integrated adjustable seat post cable routing
- Adjustable rear travel, allows for either 5.5" or 6" of rear wheel travel
- Hydroformed top tube
- Next-generation VPP linkage for pedaling performance
- OnePointFive headtube - run today's aggressive 1.5" fork, or use a stepdown headset and traditional 1 1/8" fork and take advantage of a lower ride height
- Fox Float RP23 shock
|
Price: 2280.00
|
|
| VOODOO WAZOO ONE CROSS FRAME/FORK |
Wazoo One offers a totally race ready package for the cross scene, but its sliding dropouts offer the versatility of a singlespeed mode that works well for commuting or errands. Constructed from sturdy "Black Magic" double-butted chromoly tubing with sliding aluminum dropouts.
- Great value! Includes an EVO carbon cross fork
- 51mm IS disc brake and rim brake mounts
- Accomodates up to 40c size tires, plenty of mud clearance
- Claimed 3.9 lbs
Your new Wazoo One accepts 130mm spaced rear wheels, 1 1/8" headset, 27.2mm post, 68mm BB, and 28.6mm front derailleur
Price: 600.00
|
|
| VOODOO RADA ROAD FRAME/FORK |
If you love the ride of steel, this could be the frame for you! Lightweight Reynolds 853 main triangle is mated to a shock-absorbing carbon fiber wishbone seatstays. That keeps the frame stiff and dampens road buzz. Semi-compact geometry makes this one super agile!
- includes a Voodoo Evo carbon fork - a super value at this price
- accepts 28.6mm front derailleur, 27.2mm post, 68mm BB, and 1 1/8" headset
Price: 999.00
|
|
| VOODOO BONDYE ROAD FRAME/FORK |
Totally race ready at a great price for the budding racer or enthusiast rider. "Black Magic" Scandium alloy frame (claimed just 2.9 lbs) and the package includes a matching Voodoo Evo carbon fiber fork too! Carbon stays damp road buzz and add stiffness during the sprint.
- Accepts 68mm BB, 31.8mm front derailleur, 27.2mm post, 1 1/8 headset
- Semi-compact geometry shaves grams and enhances stiffness
Price: 999.00
|
|
| VOODOO D-JAB TI FRAME |
Superlight, smooth riding, and incredibly durable "Black Magic" 3AL/2.5V titanium! Makes an efficient and comfortable hardtail for all day rides. Incredibly versatile, too - its sliding dropouts let you easily switch from geared to singlespeed and back!
- Accepts 28.6mm front derailleur, 27.2mm post, standard 1 1/8" headset, 68mm BB
- Designed around 100mm travel fork (Fox F100 or similar)
- 51mm IS mount for disc brakes
- claimed 4.0 lbs (18")
Price: 1499.00
|
|
| VOODOO BIZANGO FRAME |
A lightweight XC hardtail with classic geometry. Steel is real! Reynolds 853 tubing, plus nice touches like Breeze-in style vertical dropouts.
- Designed for 100mm fork (470mm axle to crown)
- 51mm IS mount for disc brakes
- claimed weight: 4.4 lbs
- 3 year manufacturer warranty
- Accepts 68mm BB, 27.2mm post, 1 1/8" headset, 28.6mm BB
Price: 659.00
|
|
| VOODOO SOBO XC FRAME |
An ultralight hardtail in the NORBA tradition. "Black Magic" scandium tubing with carbon fiber wishbone seatstays to take the edge off of the bumps.
- Designed around a 100mm travel fork (470mm axle to crown)
- Claimed weight: about 3 pounds
- Accepts 68mm BB, standard 1 1/8" headset, 27.2mm seatpost, and 31.8mm front derailleur
Price: 792.00
|
|
| VOODOO WANGA ONE FRAME |
Wanga One offers the sturdy, comfortable ride of chromoly steel, with versatile sliding dropouts that allow you to go geared or singlespeed. Designed around a 100mm travel fork with 470mm axle to crown, like the Fox F100 or similar.
- 51mm IS mount for disc brakes
- claimed weight: 4lbs
- Accepts 68mm BB, standard 1 1/8" headset, 27.2mm post, and 28.6mm front derailleur
Price: 425.00
|
|
| VOODOO BOKOR ONE FRAME |
Perhaps the most versatile frame in Voodoo's lineup. Bokor features sliding dropouts, so it's a snap to ride geared or singlespeed, with no need for a seperate tensioner. Designed around a 100mm travel fork, like the Fox F100.
- 7005-series aluminum tubing
- Frame accepts 1 1/8" headset, 27.2mm post, 68mm BB, and 31.8mm front derailleur
- 51mm IS mount for disc brakes
Price: 307.99
|
|
| VOODOO SHANGO JUMP FRAME |
Ride aggressively without breaking the bank! This dirt-jump hardtail is designed around a big fork in the 130mm travel range. It's constructed of beefy chromoly steel tubing with headtube gussets for strength.
- Sliding aluminum dropouts allow geared or singlespeed use
- 51mm IS mount for disc brakes
- accepts 1 1/8" headset, 27.2mm post, 68mm BB, 31.8mm front derailleur
Price: 259.00
|
|
| VOODOO ZAKA-29 " TI FRAME |
Voodoo is jumping into 29'ers in a big way for 2008! Features Voodoo's "Black Magic" 3AL/2.5V titanium frame with a versatile sliding rear vertical dropout design that permits both geared and singlespeed use.
- 51mm IS mount for disc brakes
- Designed around a 100mm travel fork
- accepts 68mm BB, 1 1/8" headset, 27.2mm seatpost, 28.6mm front derailleur
Price: 1499.00
|
|
| |
|
