|
SiteMap
|
| |
| SURLY PACER SILVER BULLET FRAME SET |
SURLY PACER SILVER BULLET FRAME SET
NEW GRAPHICS!!!
TIG-welded double-butted Surly 4130 CroMoly construction.Uses standard-reach and some short-reach brakesDowntube shifter bossesTire clearance for 32mm tires or 28mm with fendersIncludes Constrictor seatpost clampVertical Breeze- In rear dropoutsSingle fender eyelets front and rear, two sets of bottle bosses, and pump peg
Price: 410.00
|
|
| VOLUME UNION TORONTO FRAME |
VOLUME UNION TORONTO FRAME
Street, dirt, ramp or whatever your heart desires, this bike was made for it. If it's good enough for E-Man, Barney, Elwell, Enarson, Bennett, Castillo and Heaton then you know it's good enough for you too.
Price: 274.05
|
|
| PROBLEM SOLVERS CANTI STUD REPAIR KIT |
Problem Solvers Cantilever stud repair kit, includes replacement cylinder and bolt, repairs one stripped or broken stud.
Price: 6.25
|
|
| PROBLEM SOLVERS BRAKE BOSS PLUGS |
Problem Solvers rubber Brake boss plugs help prevent dirt and debris from getting in your empty brake bosses after removing cantilever studs.
Price: 4.50
|
|
| WHEELS MFG. DERAILLEUR HANGER |
Wheels Manufacturing offers a variety of replacement hangers for many makes of bikes.
Consult the Wheels Manufacturing website for information on which hanger to order.
Price: 18.50
|
|
| SURLY KARATE MONKEY FRAMESET 2007 |
Now with new colors and enhanced features for 2007 and re-designed to provide increased clearance between the fork knob / downtube interface, preventing clearance problems with some forks with tall knobs (i.e. Rockshox Reba 29'er). Same great value 29'er construction with TIG-welded butted 4130 chromoly tubes, plus a rigid suspension corrected fork.
- 51mm IS Disc tabs and removable pivots for V-brakes
- Your frame accepts a 28.6mm bottom pull, traditional (high clamp) front derailleur, 27.2mm seatpost, and 73mm bottom bracket
- This is a 29'er (700c wheel) frame and fork, and does not accept traditonal 26" MTB wheels.
GEOMETRY
| | | small | medium | large | x-large | | | | | | | ST (C-T)
Inches
mm
|
16.0
406.4
|
18.0
457.2
|
20.0
508.0
|
22.0
558.8
| | | | | | TT (C-C)
Inches
mm
|
21.7
552.0
|
22.6
574.5
|
23.4
594.5
|
24.2
614.3
| | | | | | TT (Effec.)
Inches
mm
|
22.7
576.6
|
23.6
600.6
|
24.3
617.5
|
24.9
633.6
| | | | | | HT Angle
degrees | 71.0° | 71.5° | 72.0° | 72.0° | | | | | | ST Angle
degrees | 73.0° | 73.0° | 73.0° | 73.0° | | | | | | BB Drop
Inches
mm |
2.7
68.0
|
2.7
68.0
|
2.7
68.0
|
2.7
68.0
| | | | | | CS Length
Inches
mm |
17.0
431.0
|
17.0
431.0
|
17.0
431.0
|
17.0
431.0
| | | | | | Wheel Base
Inches
mm |
41.1
1044.9
|
41.9
1064.0
|
42.4
1076.1
|
43.0
1092.1
| | | | | | Front-Center
Inches
mm |
24.5
623.0
|
25.3
642.0
|
25.7
654.0
|
26.4
670.0
| | | | | | S.O. Height**
Inches
mm |
30.8
781.6
|
31.9
811.1
|
33.0
838.2
|
34.1
866.8
| | | | | | HT Length
Inches
mm |
3.1
80.0
|
3.5
90.0
|
3.7
95.0
|
4.1
105.0
| | | | | | FK Length
Inches
mm | 18.4
468.0 | 18.4
468.0 | 18.4
468.0 | 18.4
468.0 | | | | | | FK Rake
Inches
mm | 1.7
43.0 | 1.7
43.0 | 1.7
43.0 | 1.7
43.0 | | | | | | Weight
lbs. | 5.16 | 5.34 | 5.56 | 5.69 | | | | | | ** Standover height is based on a 29 x 2.1" tire that measured 737mm in diameter |
Price: 465.00
|
|
| SURLY INSTIGATOR FRAME |
The Surly Instigator Mountain Frame isdesigned for abusive riding and jumping and is intended for use with a100-130mm suspension fork.
- Frame only - fork not included
- T IG-welded, double-butted Surly 4130 CroMoly with custom, CNC machined, disc brake compatible (International Standard) rear dropouts; 1.5" downtube and heavily gusseted front end for extra strength
- Arched top tube for added standover clearance
- Brazed-on hydraulic line guides, removable cantilever pivots, two sets of bottle bosses, and downtube shift cable routing
- Clearance for tires up to 2.7" wide
- International Standard Chain Guide mounts
- Accepts 1 1/8" headset, bottom pull, 31.8mm clamp front derailleur, 73mm BB
Price: 420.00
|
|
| WHEELS MANUFACTURING HANGER #46 |
Replacement derailleur hanger for:
HARO
K2
KONA
- 1999: Cinder Cone, Kula, Kula Deluxe, Muni Mula, Nunu, Pahoehoe
- 2000: Blast, Nunu
- 2001: Hoo-Ha, Hula
Price: 19.99
|
|
| WHEELS MANUFACTURING HANGER DIAMONDBACK |
Wheel's Manufacturing derailleur hanger #48 replaces Derby part # 32-90-250 and fits these Diamondback bicycles: - 1997: Lakeside, Response, V-Links, (Pro 1:1, 3:1), Zetec (Pro 2:1, 4:1)
- 1998: Lakeside, Voyager (1, 2, 3), V-Link 1.2, V-6, V-10, Zetec Comp, Team Issue
- 1999: Expert, Response, SE, Sherwood, Team Issue, Topanga SE, Voyager, 2 & 3 X Series, XR Series, Zetec Comp
- 2000: Crestview, Expert, Oakpoint, Master, Response, Response Sport, Sherwood, Topanga, Topanga Comp, X-Link, X-2, X-6, XR-1, XR-8
- 2001: XTS Series, Topanga Comp, Topanga, Response, Sorrento Sport, Oak Point
- 2002: Topanga, Topanga Comp, Wildwood Deluxe, Oakpoint, Crestview
- 2003: Sorrento, Response, Topanga, Carolina, Comp, Comp-disc, Apex Coil SS, XSL, XSL Trail, SL Super, Wildwood, DLX, Miramar, Ventura, AXIS Frame
- 2004: Response, Topanga EX, Comp, Carolina, Apex Coil EX, XSL, Trail, COmp, SL Super, Wildwood, DLX, Axis Frame
- 2005: Response, Topanga EX, Comp, Carolina, Apex Coli EX, XSL, Trail, Comp, SL Super, Wildwood, DLX, Axis Frame
- 2006: XSL Trail
Price: 19.99
|
|
| WHEELS MANUFACTURING HANGER FOR GT |
Price: 18.00
|
|
| WHEELS MANUFACTURING HANGER FOR KHS |
Price: 19.99
|
|
| WHEELS MANUFACTURING HANGER FOR BIANCHI |
BIANCHI 1999: Osprey, Superbee, Lynx, Advantage, Ocelot, Axis, 2000: Superbee, Boardwalk, Advantage; KHS ''01: Alite 2000, 1/2 Alite 4000 w/CNC dropout only!
Price: 18.50
|
|
| WHEELS MFR. HANGER FOR TREK / FISHER |
Wheels Manufacturing derailleur hanger for many Trek/Fisher frames.
Price: 20.00
|
|
| WHEELS MANUFACTURING HANGER FOR INTENSE |
Wheels Mfg. derailleur hanger - #70 Fits Intense Uzzi SL and Tracer, replaces Intense part # 130003
Price: 21.67
|
|
| WHEELS DERAILLEUR HANGER FOR ROCKY MTN. |
Wheels Mfg. derailleur hanger - #66, FOR MANY ROCKY MOUNTAIN XC FRAMES
- #67, ROCKY MOUNTAIN FLOW / GRIND, Iron Horse 2005-06: Yakuza, Maverick, Chimpira, Bakuto, Warrior Comp, Race
- #68, ROCKY MOUNTAIN SLAYER, ELEMENT, SWITCH, RMX
Price: 20.00
|
|
| WHEELS MFR DERAILLEUR HANGER IRON HORSE |
Wheels Mfg. derailleur hanger - #73, IRON HORSE ROGUE
- #74, SELECT IRON HORSE FRAMES 2000-05
Price: 20.00
|
|
| WHEELS MFR. HANGER FOR SPECIALIZED |
Price: 20.00
|
|
| WHEELS MFR. HANGER FOR CANNONDALE |
Wheels Manufacturing Derailleur Hangers for use with Cannondale bikes, please use the hanger photos to select the proper hanger for your application. - Wheels Manufacturing Derailleur hangers come with the required hardware to attach to the frame.
Price: 20.00
|
|
| |
|
|
|
Bikes
The Fruit Company
Comprehensive Guide Packed With Tips, Tools And Tactics To Help Beginner And Intermediate Mountain Bikers Quickly Advance Their Mountain Biking Skills And Knowledge To An Advanced Level.
Buy direct from the manufacturer and Save Big on Home Exercise Equipment today at ProForm.com
Great Deal. AFX. On all helmets
BettyMills Keyword Search
|
